Geothermal Energy systems

How Do Solar and Geothermal Energy Systems Differ?

By blog, news, Uncategorized No Comments

As a property manager, it’s your job to make sure costs are kept at a minimum. Have you thought about installing a geothermal or solar energy system? Are you confused about the difference between the two? Don’t be! Solar energy and geothermal energy systems are completely different and actually work well when implemented together. The following breaks it down.

From the Sun or the Earth

Most people know that solar energy comes from the sun. Each day when the sun is shining, solar panels soak up the energy that is used to power a building. The power can be used for anything that a building would typically need electrical power to run.

In contrast, geothermal energy comes from the earth. If you were to go outside and dig a hole about six feet deep, you’d find soil that sits at 50 degrees year-round. A geothermal system uses that steady temperature to send heat into the building during winter months. In the same way, hot air is sent back down to the earth to keep the building cool during summer.

How the Two Work Together

As you can see, geothermal and solar energy systems do not exactly perform the same function. They do both provide a less expensive form of energy but in two different ways. That’s why they’re great when implemented together.

Geothermal energy does require a small amount of electricity. With a solar energy system installed, that power doesn’t have to come from the electric company. Instead, it can come right from the solar panels on your building. Together, the carbon footprint that your building would normally make could become eliminated altogether.

Getting Started With Your System

Saving the environment takes the dedication of everyone on the planet. Do your part by implementing alternative energy systems that work. To learn more about geothermal energy and how a system can work together with a solar energy system, contact Chesapeake Geosystems today by calling 410-489-1712 or sending an email and speak with a professional.

advantages of geothermal energy

Advantages of Geothermal Energy Vs. Traditional HVAC

By blog, news, Uncategorized No Comments

Many property owners have recently taken interest in the trend of geothermal heating systems. It’s a technology that works similarly to traditional home heat pumps but depends on temperature differences deep underground rather than in the outside air. By drawing stored solar energy from the earth, geothermal systems are able to provide indoor comfort with noticeable savings and better efficiency.

Basic Benefits

When evaluating whether geothermal heating is for you, it’s smart to start with the basics. Consider these perks offered by this HVAC (heating, ventilation and air conditioning) alternative:

• Elemental protection: Geothermal units are situated within the property, avoiding the need for outdoor air conditioning compressors that are generally exposed to harsh elements.

• Constant performance: This technology remains active at all times; common HVAC systems usually cycle on and off in an attempt to regulate indoor temperatures.

• Greater consistency: Typical HVAC systems can deliver temperature fluctuations, or allow the formation of unwanted hot or cold spots.

Efficiency Examined

There are notable advantages offered by geothermal energy in terms of performance. For starters, they’re expected to function for up to 25 years—considerably longer than the approximate 10-year lifespan of common HVAC systems. Maintenance is often as minor as a simple filter change every 12 months.

These systems rely exclusively on a renewable energy source and thus are often subject to tax credits that can save you money on installation. Monthly operating costs are generally much lower than older-fashioned technologies and tend to remain more consistent over the long haul. It all makes sense, then, that the Environmental Protection Agency has designated geothermal heating as an ideal green-friendly HVAC alternative.

Make the Change

When you’re ready to make the switch to a cleaner, more affordable method of heating your property, Chesapeake Geosystems is ready to deliver results. Their experience and reputation are well established, with over 30 years serving the greater Maryland and Washington, D.C. areas. Reach out today by calling 410-489-1712 or sending an email to and get started on a more comfortable, energy-efficient home for your family.

Commercial geosystems

4 Steps to an Efficient and Long-Lasting Commercial Geothermal System

By blog, news No Comments

So, you’ve made the right choice by installing a commercial geothermal heat pump and have already witnessed the stunning savings in energy. Is there anything you can do to keep it running at maximum efficiency while prolonging its life? You bet! Just like all HVAC equipment, some routine, minor maintenance will both retain the natural efficiency as well as prevent damage and repair costs. Here are 4 things that should be done periodically for ideal operation.

Flush the System

Prior to running, a chemical flush of the pipes is essential. Over time, debris accumulates in established systems and eventually causes internal damage. Open-loop systems require periodic flushing, although all types of systems will benefit from doing it occasionally.

Purge Air From the Pipes

Air intrusion into your system is a serious matter. It’s designed to run at a precisely calculated pressure which trapped air will alter, reducing efficiency, causing corrosion and, if left unfixed, system failure. Purging the air during annual maintenance will prevent it from gathering in significant amounts.

Test the Flow Rate

Commercial geothermal systems often have multiple zones and sections, each with its own flow rate. A qualified technician can run tests to ensure that all of them are set correctly with the most advantageous flow.

Verify Optimal Pressurization

Ideal system pressure is key to keeping your geothermal heat pump running at peak efficiency. The pressure changes as the piping expands and contracts with temperature variation, so a qualified technician should be consulted for rigorous pressure testing and maintenance.

Due to the advanced technology of commercial geothermal systems, you should have it serviced by experienced technicians. In fact, annual maintenance has been shown to pay for itself in energy savings and repair costs.

Chesapeake Geosystems has IGSHPA-certified technicians who can keep your system running smoothly and protect it from damaging conditions, regardless of who installed it. As the region’s largest geothermal specialists, we’re licensed in 15 states and have been installing, inspecting and maintaining systems for over 30 years with unmatched experience and customer satisfaction. Please call us today at 410-489-1712 or send an email to Chesapeake Geosystems; we’ll be happy to answer any questions you have.

geothermal cooling and heating

3 Big Reasons to Switch to Geothermal Heating and Cooling

By news No Comments

You’re always looking to give your business the upper hand, and sometimes that means improving upon systems you already have in place. For example, changing your current heating and cooling system to a geothermal setup can make your building more efficient, thereby saving you a load of extra cash. While geothermal heating and cooling is by no means new, it’s been gaining popularity in commercial buildings and personal residences alike because it can offer a few key benefits that set it above other available options.

1. Affordable Operation

As the owner of a commercial venture of any sort, you know that your cash flow is everything. Monthly heating and energy costs are a drain on that cash flow, which is why reducing them as much as possible is always a good idea. While the system might be expensive to install initially, the average geothermal setup boasts a 400 percent efficiency rating, and you’re sure to see the difference in your bill each month.

2. Eco-Friendliness

Use of a geothermal heating and cooling setup is by far the most environmentally safe way to change the temperature of any building. The system operation is powered using water that’s stored underground, and is notably different energy-wise than other options because it:

• Produces no carbon monoxide
• Uses hardly any electricity
• Avoids the production of any greenhouse gasses

Geothermal heaters also supply an instant and almost endless supply of hot water, which further allows homeowners and commercial building owners a way to cut back on electricity costs.

3. Safety

Geothermal heating requires no combustion, which automatically makes it the safest option out there. There is no risk of carbon monoxide poisoning as there often is with the average furnace, and the absence of flammable fossil fuels means there’s basically no chance of a fire starting as a result of heating your building.

With these impressive benefits and many others to boast, it’s no wonder that geothermal heating and cooling is becoming the go-to temperature control option for business and homeowners everywhere. Contact us at Chesapeake Geosystems by calling 410-489-1712 or emailing Chesapeake Geo us today to learn about how geothermal energy can power your everyday operations.

How to Choose a Geothermal Contractor?

By blog, news No Comments

As an increasing number of homeowners and businesses move towards a more sustainable lifestyle, the desire for energy efficient, geothermal heating and cooling systems has been on the rise. As the demand increases, so do the number of contractors offering such systems. But how do you know which to choose? It can be a daunting task choosing a geothermal contractor if you don’t know what to look for, so here are a few tips to get you started.

Licensed & Accredited

isghpa-chesapeake-geosystemsThe most basic qualification to seek out when beginning your search is a licensed contractor. These licenses come with a complete understanding of the local and state building codes, ensuring the work being done is not only compliant, but safe. Look for an IGSHPA (International Ground Source Heat Pump Association) Accredited Installer, which can be done through a simple database search on the IGSHPA Website. These contractors have completed various training classes to ensure the safety and reliability of their work. Chesapeake Geosystems is a qualified IGSHPA Accredited Installer with a highly trained staff to complete a seamless installation and address all issues that may arise.


Once you’ve found a licensed and accredited geothermal contractor, begin to look further into their level of expertise. You want someone who has not only been in the business for many years, but someone who you can trust to know the local terrain, which will ultimately help avoid environmental installation issues. Chesapeake Geosystems has over 25 years of experience in the industry and is considered a local Geothermal expert.

Testing Procedures

Next, check out which, if any, testing procedures the contractor implements during the installation process. You don’t want a geothermal contractor that is going to cut corners. Extensive testing at every phase of installation is critical to ensure the integrity of the geothermal heating and cooling system and in assuring customers of a hassle-free operation. Chesapeake Geosystems conducts testing every step of the way and considers no project complete until your system meets the highest of standards.


find-geothermal-contractorGeothermal heating and cooling systems can only thrive when properly set-up and installed. Take note of the geothermal contractor’s process from start to finish. Consider the level of detail in their proposal, the sizing estimates of the system they are recommending, and the project managers that will be executing the project. Having a superintendent available during the installation process allows for quick and efficient communication for both the client and the install team. Chesapeake Geosystems assigns a superintendent to all projects, big or small, and is always available for customer consultation should you have questions or concerns.
Choosing the right geothermal contractor is crucial to the success and efficiency of your geothermal heating and cooling system. Do your homework and make sure you’re choosing a contractor that is licensed and accredited, experienced, diligent in testing and executes a rigid installation process.

For a geothermal contractor that meets all the criteria, look no further than Chesapeake Geosystems located in Baltimore, Maryland. Click Here for a free quote, or call 1-800-252-4007 to set up a consultation today!